Centerforce KCFT770751 – ? II, Performance Clutch and Flywheel Kit, 127 Tooth Gear, 8 Bolt Crank, 434 ft/lbs Capacity, 10.4in Dia., 21-Spline, Fits Jeep Gladiator and Wrangler 3.6L

Description

Centerforce KCFT770751 – ? II, Performance Clutch and Flywheel Kit, 127 Tooth Gear, 8 Bolt Crank, 434 ft/lbs Capacity, 10.4in Dia., 21-Spline, Fits Jeep Gladiator and Wrangler 3.6L

Clutch Kit – Centerforce II – Single Disc – 10.4 in Diameter – 1-1/8 in x 21 Spline – Sprung Hub – Organic – Jeep V6 – Kit

Centerforce(R) II Clutch Series utilizes our centrifugal weights and patented machining processes for superb holding power and maximum clutch life. Includes an inertia flywheel and hydraulic bearing upgrade; seefor more info.

The Centerforce(R) II Clutch Series utilizes a full facing disc with premium friction material and a pressure plate with centrifugal weights (where applicable). Furthermore, static clamp load is increased via our patented machining processes; this combination allows superb holding power and maximum clutch life, making this clutch ideal for selected street/strip, off-road and towing applications.The Torque Figures for Centerforce II Pressure Plates are based and calculated in conjunction with a Centerforce I & II Clutch Disc.This kit includes a billet steel inertia flywheel, which has added weight to increase the inertia of the engine. This extra inertia helps smooth rpm when negotiating difficult terrain and helps prevent stalling at slow speeds, which is particularly beneficial for off-road use and during normal city driving.This kit further utilizes the Centerforce Internal Hydraulic Bearing Upgrade. The factory Jeep hydraulics package has a vague clutch pedal feel that many enthusiasts dislike, where there’s not much pedal feedback as the clutch is engaged and disengaged. Our internal Hydraulic Bearing Upgrade simplifies the clutch actuation system by replacing the external slave, clutch fork, pivot ball, throwout bearing, and bearing collar with a simplified hydraulic bearing bearing that acts as the throwout bearing and slave all in one compact package. This kit provides a more traditional pedal feel that Jeep enthusiasts are used to along with eliminating potential sources of rattles, especially as the vehicle ages.

• 10.400 in. Diameter
• 1.125 in. x 21 Spline Input Shaft
• 264.2 mm Diameter
• Centrifugally Assisted
• Dual Friction[R] Design
• Holds Up To 434 ft/lbs Of Torque
• Sprung Hub Disc with Organic Material
• 127 Tooth R.Gear/8 Bolt Crank
• Sprung Hub

Torque Capacity: 434Tooth Quantity: 127Disc Type Sprung Solid: SprungDisc Quantity: 1Input Shaft Diameter: 1-1/8Counterweight Assist: YesInput Spline Quantity: 21Disc Material: OrganicDisc Type: Full FaceRing Gear O.D.: 12.785Clutch Disc Diameter: 10.4Material: Cast Iron Pressure Plate / Organic FrictionCrankshaft Bolt Hole Quantity: 8Flywheel Crank Bolt Size: M10 x 1.00 x 25Release Bearing Included: YesAlignment Tool Included: YesMounting Hardware Included: YesMade In The USA: Assembled